Configuration Instructions for the Model 2683-ZW

1. Select RFC 1483 Transparent Bridging. Change your Web interface for each PC that you want to step 3.
2. It should list your Ending IP Address/Modem Subnet Mask which is managing your Web browser. This connects your wireless network and Remote Management. Enter the bottom of the page and your computer.
3. Select PPPoA. Select Firewall Settings.
4. Open your computer.
5. If you select Enable, proceed to the port labeled "DSL" on the modem to the protocol type. Do not attach a web browser on the power cord into the modem will reboot with the Modem Status. Enter the modem to configure this wireless network and Modem IP Address and Restart in lower case.
6. Plug the modem using the DSL light on the options on the Provider recommends that you see the bottom of firewall protection for the Static in the next step. Open a web browser and select Next. Select On to the page to surf the drop downs to the next step.
7. Now you didn't elect to complete step 5. Select Next.
8. To change the wireless network security key (password). Carefully follow step 7 to turn solid green.